Enquire about this listingAdd to cart

ScanGauge II 3-in-1 Compact Multifunction Vehicle Computer with Customizable Display

177.30 166.85 AUD

*Out of stock

The ScanGaugeII has been redesigned with expandable Add-A-Gauge (aka
XGauge) technology. Add to the original 12 gauges by customizing the
ScanGaugeII to monitor up to 25 more--depending on your specific
vehicle's sensor design. Four gauges can be displayed simultaneously
and can help determine fuel consumption rates, allowing you to adjust
driving behavior and save gas. At the same time, keep an eye on coolant
temperature, engine speed, and much more in real time. If there is a
young driver in the house or friends borrow your car, the ScanGaugeII
can record speeds of up to 158 mph and store the information for you to
view later, so you will know just how fast your young driver or friend
was going last night. If the unit was disconnected, you'll know: An
indicator will be displayed in the trip data.

Gauges include:

• Horsepower
• Fuel Consumption Rate to 1/100th per gallon/liter
• Vehicle speed (MPH)
• Fuel Economy
• Cost Per Mile/Cost Per Trip
• Manifold Pressure (not available on some vehicles)
• Battery Voltage
• Engine Load
• Coolant Temperature
• Throttle Position
• Intake Air Temperature
• Ignition Timing
• Engine Speed (RPM)
• O2 Sensor Data
• Fuel Trim
• Hybrid Battery Charge (for Toyota Prius and Ford Escape)
• And many more, depending on your vehicle's sensor design

Scan Tool

The ScanGaugeII includes a diagnostic scan tool that can check for
Diagnostic Trouble Codes (DTCs), clear the codes, and turn off the
"Check Engine" light on 99% of 1996 and newer vehicles. (However, this
feature may not work on some trouble codes in Dodge vehicles.) If any
DTCs are found, the ScanGauge will show how many there are as well as
the codes themselves. Then you can use the Internet or repair manual to
find out which is the failed part is, so you can repair it yourself or
know what needs to be fixed at the mechanic's shop.

Multifunction Trip Computer

Four sets of data are automatically recorded on the trip computer:
Current, Today, Previous Day, and Tank Trip. The "current" trip
restarts after the engine has been off for more than 3 minutes. The
"today" trip restarts after the vehicle has not moved for 9 hours, and
the data from "today" is moved to "previous day" when you restart the
car, so you don't have to reset the computer every time you begin a
trip. "Tank trip" resets when you fill up the tank. It can provide you
with "to empty" data and other useful information, which can be viewed
any time during the trip. The trip computer also integrates information
from the Cost Per Mile gauge. Simply enter how much you paid per gallon
or liter of fuel, and the ScanGauge will automatically calculate the
cost of your trips as you drive. The ScanGaugeII features 12
individually stored parameters, including:

• Maximum Speed
• Average Speed
• Maximum Coolant Temperature
• Maximum RPM
• Driving Time
• Driving Distance
• Fuel Used
• Fuel Cost
• Trip Fuel Economy
• Distance to Empty
• Time to Empty
• Fuel to Empty

Personalize It

A large, high-contrast LCD display makes viewing the information easy,
and both the display and keys are backlit and can be set to off, low,
or high. With 63 possible colors, user settings, tank trip data, and
vehicle settings that are automatically saved, and up to 10 user
commands that can be stored and recalled, the ScanGaugeII can be easily
customized to suit your needs.

Buy from Amazon.com